How to Maintain Press Brake and Shearing Machines for Long-Term Performance
In modern metal fabrication workshops, press brakes and shearing machines are essential for daily sheet metal processing. These machines often operate for long hours, and their performance directly affects production efficiency, processing accuracy, and product quality.
However, regular maintenance is often overlooked during busy production schedules. Dust accumulation, insufficient lubrication, hydraulic oil contamination, and worn components may gradually affect machine performance.
Proper maintenance not only helps extend equipment service life but also reduces unexpected downtime and repair costs. Here are some practical maintenance tips for press brakes and shearing machines.
1. Check the Hydraulic System Regularly
For hydraulic press brakes and shearing machines, the hydraulic system is one of the most important parts of the equipment.
Operators should regularly check:
Hydraulic oil level in the tank.
Hydraulic pipes and connections for oil leakage.
Oil temperature during machine operation.
Hydraulic filters and oil cleanliness.
Hydraulic pump and valve operation.
Contaminated hydraulic oil may affect valve performance, cause unstable machine movement, and increase component wear.
Hydraulic oil should be replaced according to the manufacturer's maintenance recommendations and actual operating conditions.
2. Keep the Machine Clean and Lubricated
Dust, metal particles, and processing residues can accumulate on machine surfaces and moving components during daily production.
Regular cleaning helps prevent unnecessary wear and keeps the machine operating smoothly.
For press brakes, special attention should be paid to:
Guide rails and moving components.
Backgauge positioning system.
Tooling and clamping areas.
Mechanical transmission components.
For shearing machines, operators should also clean the blade area, worktable, and material support surfaces.
Lubrication should be performed according to the machine manual, using the recommended lubricant and maintenance intervals.
3. Inspect Blades and Press Brake Tooling
The condition of cutting blades and bending tools directly affects processing quality.
For shearing machines, operators should regularly inspect the upper and lower blades for wear, damage, or uneven cutting edges.
Worn or improperly adjusted blades may cause burrs, poor cutting quality, and increased cutting resistance.
For press brakes, upper punches and lower dies should be checked for cracks, deformation, and surface damage.
Using suitable tooling for different material thicknesses and bending requirements helps maintain processing accuracy and reduce unnecessary machine loads.
4. Check Electrical and Safety Systems
Electrical components and safety devices are essential for reliable machine operation.
Regular inspections should include:
Electrical cabinet cleanliness.
Cable connections and terminal conditions.
Emergency stop buttons.
Foot pedal operation.
Safety guards and protection devices.
CNC controller and operating panel.
For CNC press brakes, operators should also check the backgauge positioning system and confirm that the machine axes operate normally.
Any abnormal electrical behavior or safety device failure should be inspected by qualified technicians before the machine returns to production.
5. Establish a Regular Maintenance Schedule
A structured maintenance plan helps factories identify potential problems before they develop into serious equipment failures.
A practical maintenance schedule can include:
Daily Maintenance
Clean the machine and working area.
Check for unusual noise or vibration.
Inspect visible oil leakage.
Check the condition of tools and blades.
Weekly Maintenance
Inspect lubrication points.
Check electrical connections and safety devices.
Inspect moving components and machine positioning.
Periodic Maintenance
Check hydraulic oil condition and filters.
Inspect hydraulic pumps, valves, and cylinders.
Check machine alignment and mechanical components.
Replace worn parts when necessary.
The actual maintenance intervals should always follow the equipment manufacturer's instructions and operating conditions.
CHNVIKEN – Reliable Sheet Metal Processing Equipment
CHNVIKEN specializes in manufacturing sheet metal processing machinery, including CNC press brakes, hydraulic shearing machines, fiber laser cutting machines, plate rolling machines, and HVAC duct production equipment.
We understand that reliable equipment performance is important for every manufacturing business. In addition to providing practical machinery solutions, we support customers with technical consultation, installation guidance, operator training, and after-sales service.
With over 14 years of industry experience, customers in more than 100 countries and regions, and over 3,200 client partners, CHNVIKEN is committed to helping manufacturers improve production efficiency and maintain stable processing quality.
Whether you are purchasing new equipment or looking for ways to improve your existing production operations, our team is ready to assist.
Contact CHNVIKEN today to learn more about our sheet metal processing solutions!
Website: https://www.chnviken.com/