130-Ton Electric Press Brake 3200mm - Leading China Suppliers & Factory for Sheet Metal Manufacturing
Application
The EP130/3200S is intended for sheet metal manufacturers that handle a mixture of medium and relatively large components.
Its 3200 mm working area provides room for longer sheets and fabricated panels, making the machine suitable for applications such as electrical enclosures, industrial cabinets, machine housings, ventilation components, elevator parts, metal furniture, agricultural equipment, and general structural fabrication.
Rather than being limited to one particular product category, the machine can be integrated into workshops where part dimensions and production quantities change regularly. This makes it particularly useful for job shops and manufacturers producing customized components for different customers.
The 130-ton capacity gives the machine a broader forming range than lighter electric press brakes, allowing it to address applications where higher forming force is required while retaining the operating characteristics of an electric bending machine.
Electric Bending Technology
The EP130/3200S uses an electric drive concept to generate and control the movement required during the bending process.
Compared with a conventional hydraulic architecture, an electric system can operate without the same hydraulic oil circuit and associated hydraulic components. This changes the way the machine consumes and transfers power during production and can simplify the overall working environment.
Electric drive technology is particularly interesting for factories that want to reduce dependence on hydraulic equipment and create a cleaner production area.
The controlled movement of the drive system also allows the bending cycle to be managed according to the programmed job. This is useful when different workpieces require different angles, sequences, or positioning conditions.
CNC Production Management
The CNC interface provides the operator with a central location for preparing bending jobs.
Depending on the final configuration, the operator can enter values such as bend angles, material information, bending sequence, tooling data, and workpiece positioning parameters.
Once a job has been prepared, the corresponding information can be retained for subsequent production. This can be useful for manufacturers receiving repeat orders or producing families of similar components.
For workshops with frequent product changes, digital job preparation can also make the transition between different components more straightforward. Instead of treating every workpiece as a completely new setup, operators can use previously established production information as a starting point.
130-Ton Forming Capacity
The EP130/3200S provides a nominal 130-ton forming capacity across a 3200 mm working width.
This configuration is suitable for a wide range of sheet metal work, although the actual achievable thickness depends on material grade, bend length, tooling, die opening, bend radius, and other process conditions.
Commonly processed materials can include carbon steel, stainless steel, galvanized steel, aluminum, and other compatible sheet metals.
The relatively wide working area is useful when manufacturing long panels or components containing multiple bends. Operators can also divide the available working area according to the dimensions of individual parts and the selected tooling arrangement.
Workpiece Handling and Positioning
Positioning accuracy becomes increasingly important as a component contains more bends.
The EP130/3200S uses a programmable positioning arrangement to establish the reference location of the sheet before forming. This reduces the need to rely solely on manual rulers or repeated physical measurements.
For multi-bend components, the programmed position can be used as a reference for successive operations. This helps operators maintain the intended relationship between different bends during production.
The positioning configuration can also be selected according to the customer's requirements, allowing the machine to be matched to different levels of production complexity.
Tooling Options
The type of punch and die has a direct influence on the final geometry of a bent component.
The EP130/3200S can be supplied with tooling selected according to the customer's materials and product requirements. Conventional tooling can cover everyday bending work, while special tooling can be considered for unusual profiles, narrow flanges, specific radii, or components with limited forming clearance.
Segmented tooling can also be useful when several different bending lengths need to be accommodated on the same working table.
Selecting the appropriate tooling allows manufacturers to use one machine for a wider variety of components rather than dedicating separate equipment to each individual product.
Production Advantages
One of the main characteristics of the EP130/3200S is the combination of a relatively high forming capacity with an electric operating concept.
For manufacturers, this can provide several practical benefits:
Reduced reliance on conventional hydraulic components
A cleaner machine environment without routine hydraulic oil circulation
Responsive movement during programmed bending cycles
Convenient digital job preparation
A wide 3200 mm working range
Flexible tooling arrangements
Suitability for changing production schedules
These characteristics make the EP130/3200S particularly relevant to modern sheet metal workshops where production flexibility is as important as basic bending capacity.
Suitable Materials
The machine can be used for a variety of commonly fabricated sheet materials, including:
Carbon Steel
For machinery parts, frames, cabinets, brackets, and structural components.
Stainless Steel
For equipment housings, kitchen products, architectural components, and industrial enclosures.
Galvanized Steel
For ventilation-related products, panels, enclosures, and corrosion-resistant fabrication.
Aluminum
For lightweight covers, panels, frames, and fabricated assemblies.
The recommended bending conditions should always be determined according to the actual material properties, thickness, tooling, bend geometry, and required finished dimensions.
Safety and Operation
The EP130/3200S can be configured with suitable machine safety equipment according to the final specification.
Typical arrangements may include emergency-stop functions, electrical protection, safety warning labels, protective systems, and foot-pedal operation.
The CNC interface provides centralized access to production settings, while the machine layout allows operators to work around the bending area during normal loading and unloading procedures.
Operators should verify the selected program, material position, tooling combination, and safety conditions before starting a bending cycle. Regular checks of electrical components, tooling, positioning equipment, drive components, and other working parts are recommended as part of normal machine care.
Why Choose the EP130/3200S?
The EP130/3200S Electric Press Brake is positioned for manufacturers that need more forming capacity without automatically moving to a conventional hydraulic platform.
Its combination of 130-ton capacity, 3200 mm working width, electric drive technology, CNC operation, programmable positioning, and flexible tooling makes it suitable for a broad range of sheet metal production tasks.
For companies producing electrical cabinets, machinery components, HVAC parts, metal enclosures, structural panels, and customized fabricated products, the EP130/3200S can serve as a versatile production machine for both repeat manufacturing and changing customer orders.
Detail Pictures
Frequently Asked Questions
What is the primary application of the EP130/3200S?
The EP130/3200S is designed for sheet metal manufacturers handling medium to large components. Its 3200 mm working area and 130-ton capacity make it suitable for producing electrical enclosures, industrial cabinets, ventilation parts, metal furniture, agricultural equipment, and general structural fabrication.
How does electric bending technology differ from conventional hydraulic systems?
Unlike conventional hydraulic systems, the electric drive system operates without a hydraulic oil circuit and associated components. This eliminates routine hydraulic oil circulation, providing a cleaner workshop environment, responsive movements, and simplified maintenance.
What materials can be processed on the EP130/3200S?
The machine is compatible with a wide range of commonly fabricated sheet metals, including Carbon Steel, Stainless Steel, Galvanized Steel, and Aluminum. The actual thickness capacity depends on the material grade, tooling, and bend parameters.
How does the CNC interface assist with production management?
The CNC interface allows operators to enter and store job information such as bend angles, material data, sequences, and tooling setups. This digital database simplifies job preparation, making repeat orders and transition between different components fast and straightforward.
What safety features are equipped on this electric press brake?
Typical configurations can include emergency-stop buttons, electrical protection systems, safety warning labels, foot-pedal operation, and active protection systems (such as laser guards) to protect operators during loading, bending, and unloading.